research-and-development-banner

Publications 2018

____________________________
FG Engineering Mechanics/Structural Mechanics 
 
 

Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber , C.; Wong, S.L.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H.-O.; Nikolov, S.; Friák, M.; Fujita, N.; Grilli, N.; Janssens, K.G.F.; Jia, N.; Kok, P.J.J.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D.:

DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale, Computational Materials Science (2018), DOI: 10.1016/j.commatsci.2018.04.030

 

Bakir, A.; Hochrainer, T.;  Tushtev, K.; Rezwan, K.:

Determing three dimensional failure surfaces for porous ceramics from FE simulations and mechanical testing, 21st European Workshop on Automatic Differentiation, Jena, Germany, 2018

 

Zeißig, M.; Jablonski, F.; Kienzler, R.:

Beschreibung des Einflusses prozessbedingter Poren auf die mechanischen Eigenschaften von SLM-Proben, 50. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, Paderborn, Germany, 2018

 

Schneider, P.; Kienzler, R.:

Modelling of Anisotropic Boundary Layer Effects in Plate Theories. Proceedings in Applied Mathematics and Mechanics (PAMM) 18 (2018) to appear

 

Schneider, P.; Kienzler, R.:

Modeling of Reisner-type Plate Theory to Monocline Material. Book of proceedings. 21st International Conference on Composite Structures. Bologna, Italy 2018 to appear

 

Kienzler, R.; Fischer, F.D.; Wessel, A.:

An Improved Engineering Approach to Assess Crack Arrays - an Addendum to Arch. Appl. Mech. 84 (2014) 1325-1337. Arch. Appl. Mech. (2018). DOI: 10.1007/s00419-018-1493-4

 

Schröder, R.; Bitykov, V.; Kienzler, R.:

Simulation and Evaluation of Different Metal-Fibre-Transition Structures. Science-Report of the Research Unit “Schwarz-Silber” (FOR 1224). Faser-Institut Bremen e. V. (2018) 99-127

 

 

____________________________
 Prof. Dr.-Ing. Bernd Kuhfuß
 
 
 

Herrmann, M.; Hasselbruch, H.:

Rundkneten ohne Schmierstoff

Umformtechnik Massiv+Leichtbau, Ausgabe 02/2018, Meisenberg Verlag, Bamberg

https://www.umformtechnikmagazin.de/umformtechnik-forschung/rundkneten-ohne-schmierstoff_34846_de/

 

Ishkina, S.; Schenck, C.; Kuhfuß, B.:

Conditioning of Material Properties by Micro Rotary Swaging

The 21st anniversary of the International ESAFORM Conference on Material Forming (Esaform 2018), 23.-25. April 2018, Palermo (Italy)

Citation: AIP Conference Proceedings 1960, 160013 (2018); https://doi.org/10.1063/1.5035039 View online: https://aip.scitation.org/doi/10.1063/1.5035039 View Table of Contents: http://aip.scitation.org/toc/apc/1960/1 Published by the American Institute of Physics

 

Herrmann, M.; Schenck, C.; Kuhfuß, B.:

Graded Structured Tools for Dry Rotary Swaging

Dry Met. Forming OAJ FMT 4 (2018) pages 018-024

 

Herrmann, M.; Schenck, C.; Kuhfuß, B.:

Dry Rotary Swaging with Structured and Coated Tools

The 21st anniversary of the International ESAFORM Conference on Material Forming (Esaform 2018), 23.-25. April 2018, Palermo (Italy)

 

Langstädtler, L.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:         

Electromagnetic Joining of Thin Sheets by Adapted Pulses Key Engineering Materials, Online:

2018-04-24, ISSN: 1662-9795, Vol. 767, pp 439-446, doi:10.4028/www.scientific.net/KEM.767.439

© 2018 Trans Tech Publications, Switzerland https://www.scientific.net/KEM.767.439.pdf

 

Langstädtler, L.; Pegel, H.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:

Electrohydraulic incremental bulk metal forming5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 03001, https://doi.org/10.1051/matecconf/201819003001

 

Toenjes, A.; Ishkina, S.; Schenck, C.; von Hehl, A.; Zoch, H.-W.; Kuhfuß, B.:

Eccentric rotary swaging variants

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15003, https://doi.org/10.1051/matecconf/201819015003

 

 

Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B.:

Generation of residual stresses in rotary swaging process

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018,

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04001

https://doi.org/10.1051/matecconf/201819004001

 

Böhmermann, F.; Herrmann, M.; Riemer, O.; Kuhfuß, B.:

Reducing Abrasive Particle Generation in Dry Rotary Swaging by Utilizing DLC Hard Coated Dies

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018,

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 14011

https://doi.org/10.1051/matecconf/201819014011

 

 

 

Bösing, I.; Herrmann, M.; Bobrov, I.; Thöming, J.; Kuhfuß, B.; Epp, J.; Baune, M.:

The influence of microstructure deformation on the corrosion resistance of cold formed stainless steel

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018, 

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04002

https://doi.org/10.1051/matecconf/201819004002

 

 

 

Pegel, H.; Langstädtler, L.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:      

Electrohydraulic sheet metal forming with flexible tools

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018,

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 12001

https://doi.org/10.1051/matecconf/201819012001

 

 

 

Langstädtler, L.; Pegel, H.; Herrmann, M.; Schenck, C.; Stöbener, D.; Westerkamp, J.F.; Fischer, A.; Kuhfuß, B.:

Electrohydraulic extrusion of sperical bronze (CuSn6) micro samples

8th International Conference on High Speed Forming (ICHSF 2018), 13-16 May 2018 Ohio/USA

 

 

 

Wilhelmi, P.; Schattmann, C.; Schenck, C.; Kuhfuß, B.:            

Interactions between feed system and process in production of preforms as linked micro parts

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018,

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15004

https://doi.org/10.1051/matecconf/201819015004

 

 

 

Onken, A.-K.; Wilhelmi, P.; Tracht, K.; Kuhfuß, B.:

Increased output in micro production by tolerance field widening and synchronisation

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 2018,

5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15006

https://doi.org/10.1051/matecconf/201819015006

 

 

 

Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:

 

Axial and Radial Material Flow Analysis in Infedd Rotary Swaging of Tubes

 

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

 

MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04003, https://doi.org/10.1051/matecconf/201819004003

 

 

 

Moumi, E.; Wilhelmi; P.; Schenck, C.; Herrmann, M.; Kuhfuß, B.:

Material flow control in plunge micro rotary swaging

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15014; https://doi.org/10.1051/matecconf/201819015014

 

 

 

Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfuß, B.:

High productivity micro rotary swaging

5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen

MATEC Web Conf. Volume 190, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15002, https://doi.org/10.1051/matecconf/201819015002

 

 

Toenjes, A.; Ishkina, S.;  von Hehl, A.; Schenck, C.; Zoch, H.-W.; Kuhfuß, B.:

Multistage Eccentric Rotary Swaging

HTM J. Heat Treatm. Mat. 73 (2018) 6, pp. 344-351, DOI:10.3139/105.110372; ISSN 1867-2493, Carl Hanser Verlag GmbH & Co. KG

 

____________________________
Prof. Dr.-Ing. Kirsten Tracht
 
 
 

Rückert, P.; Meiners, F.; Tracht, K.:

Augmented Reality for teaching collaborative robots based on a physical simulation of human-robot collaboration

MHI Fachkolloquium, (2018)

 

 

Rückert, P.; Adam, J.; Papenberg, P.; Paulus, H.; Tracht, K.:

Calibration of a modular assembly system for personalized and adaptive human robot collaboration

7th CIRP Conference on Assembly Technologies And Systems, (2018)

 

Tracht, K.; Onken, A.-K.; Gralla, P.; Emad, J.; Kipry, N.; Maaß, P.:

Trend-specific clustering for micro mass production of linked parts

CIRP Annals 67, 1 (2018) 9-12.

 

 

Onken, A.-K.; Meiners, F.; Tracht, K.: 

Spare parts for selectively assembled linked parts in micro production

Procedia Manufacturing 19 (2018) 82-86

 

 

Meiners, F.; Tracht, K.: 

Clamping of Microspheres with Low Melting Metals

Proceedings of the 2nd World Congress on Micro and Nano Manufacturing (WCMNM), (2018) 367-370

 

 

Gebert, K.; Onken A.K.; Tracht K.: 

Assembly workshops for acquiring and integrating expert knowledge into assembly process planning using rapid prototyping model.

3. MHI-Fachkolloquium - Wissenschaftliche Gesellschaft für Montage, Handhabung und Industrierobotik MHI e.V., Nürnberg, February 2018

 

 

Gebert, K.; Bader, A.; Tracht K.: 

Decision tool for designing derivative products for supporting assembly planning of large-volume assembly groups. 7th CIRP Conference on Assembly Technologies and Systems, Tianjin, China, May 2018

 

 

Rückert, P; Roggendorf, S.: 

Arbeiten im Verbund - Kollaborative Montage variantenreicher Produkte. handling, 4 (2018), 22-23

 

 

Rückert, P.; Onken, A.-K.; Tracht, K.:

Langzeitspeicherung von Teileverbunden in der Mikroproduktion

Werkstattstechnik online, 108/7-8, (2018) 525-529

 

 

Bader, A.; Meiners, F.; Tracht, K.: 

Accelerating High-throughput Screening for Structural Materials with Productions Management Methods. Materials, Vol. 11, 8 2018, 1330.

 

 

Sievers, T.; Tracht, K.: 

Dezentrale Montagesteuerung in der Gruppenmontage. ZWF, 9 (2018) 2-5

 

 

Sievers, T.; Hogreve, S.; Tracht, K.: 

Decentralised dis- and reassembly control in maintenance of large-scale products. Procedia Manufacturing, Volume 16 (2018) 187-192