research-and-development-banner

Publications 2016

____________________________

Prof. Dr.-Ing. habil. Rein­hold Ki­enzler 

 

Kienzler, R.; Schneider, P.:

Consistent Plate Theories - A Matter Still not Settled? In: Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues. Proceedings of the 3rd Polish Congress of Mechanics (PCM) and the 21st International Conference on Computer Methods in Mechanics (CMM). M. Kleiber, J. Górski, T. Burcyński, K. Winkelmann, K. Wilde, Ł. Smakosz (Eds.). CRC Press/Balkema, Taylor & Francis, London (2016) 13-16

 

Kienzler, R.; Schneider, P.:

Direct Approach Versus Consistent Approximation. In: Advanced Methods of Continuum Mechanics for Materials and Structures. K. Naumenko, M. Aßmus (Eds.). Advanced Structured Materials 60 (2016) 415-433

 

Kienzler, R.; Schneider, P.:

On Displacements and Stresses in a Second-Order Consistent Plate Theory. In: 9th German-Greek-Polish Symposium Recent Advances in Mechanics, Kolympari, Crete, Greece, September 4-9, 2016. Book of Abstracts J. T. Katsikadelis, G. E. Stavroulakis (Eds.). Hellenic Society of Theoretical and Applied Mechanics (2016) 3-4

 

Schneider, P.; Kienzler, R.:

Mathematically Justified Refined Theories of Thin Structures. Proceedings of the 24th International Congress of Theoretical and Applied Mechanics. PO.SM04-1.16.230 (2016) 1974-1975

 

Schneider, P.; Kienzler, R.:

A-priori Estimates for Consistent Refined Theories for ThinStructures. Proceedings in Applied Mathematics and Mechanics (PAMM) 16 (2016) 237-238

 

Schneider, P.; Kienzler, R.:

The Mathematical Justification of a Consistent Refined Beam Theory. In: Mechanics of Materials: Mechanics of Interfaces and Evolving Microstructures. Report No. 17/2016. R. Kienzler, D. L. McDowel, S. Müller, E. A. Werner (Eds.). Oberwolfach Reports 13 (2016) 847-850

 

Schneider, P.; Kienzler, R.:

Mathematically Justified Theories for Thin Structures. In: Contributions to the Foundations of Multidisciplinary Research in Mechanics. Papers presented at the 24th International Congress of Theoretical and Applied Mechanics. ICTAM 16, Montreal. J. U. Floryan (Ed.) 3 (2016) 1976-1977

 

Kienzler, R.; Schröder, R.:

Assessment of Defect Configurations by Influence Surfaces in Material Space. In: 11th HSTAM Congress on Mechanics. Advances in Theoretical and Applied Mechanics. Book of Abstracts. H. G. Georgiadis, V. K. Koumousis (Eds.). Hellenic Society of Theoretical and Applied Mechanics (HSTAM), Athens, Greece (2016) 83

 

Kienzler, R.; Schröder, R.:

On Influence Surfaces in Material Space. International Journal of Fracture 202 (2016) 207-215

 

Kienzler, R.:

Defect and Material Mechanics: Editorial. International Journal of Fracture 202 (2016) 127

 

Kienzler, R.:

Material Conservation and Balance Laws in Linear Elasticity with Applications. In: Lecture Notes of the Tbilisi International Centre of Mathematics and Informatics (TICMI). G. Jaiani (Ed.). Tbilisi University Press 17 (2016) 35-65

 

Kienzler, R.; McDowell, D. L.; Müller, S; Werner, E. A.:

Mechanics of Materials. ReportNo. 17/2016. Oberwolfach Reports 13 (2016) 797-867

 

Krummrich, P. D.; Schneider, P.; Hochrainer, T.:

Experimental Validation of RVE Based Failure Simulations of Macro-porous Materials. Proceedings in Applied Mathematics and Mechanics 16 (2016) 365-366

 

Ebrahimi, A; Hochrainer, T.:

Three-Dimensional Continuum Dislocation Dynamics Simulations of Dislocation Structure Evolution in Bending of a Micro-Beam. MRS Advances 1(24), 1791–1796 (2016) DOI: 10.1557/adv.2016.75.

 

Ebrahimi, A.; Hochrainer, T.:

Small Scale Plasticity Simulated With Continuum Dislocation Dynamics.

Proceedings of the 24th International Congress of Theoretical and Applied Mechanics, Montreal, Canada, 2016

 

Ebrahimi, A.; Hochrainer, T.:

Crystal Plasticity Finite Element Simulations based on Continuum Dislocation Dynamics. PAMM, Proceedings in Applied Mathematics and Mechanics 16, 325–326 (2016) DOI: 10.1002/pamm.201610151

 

 

____________________________
 Prof. Dr.-Ing. Bernd Kuhfuß
 

Foremny, E.; Schenck, C.; Kuhfuß, B.:

Integrated ultrasonic driven balancer for ultra precision high speed machine tools (2016). 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Pro-duction Engineering (SysInt 2016), June 13th- 15th 2016, Paderborn Procedia Technology 00 (2016), S. 000-000.

 

Bloem, A.; Schenck, C.; Kuhfuß, B.:

Adaptive state-space model for ultra-precision feed axis (2016). 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Pro-duction Engineering (SysInt 2016), June 13th- 15th 2016, Paderborn Procedia Technology 00 (2016), S. 000-000.

 

Bloem, A.; Wilhelmi, P.; Schenck, C.; Kuhfuß, B.:

2D position sensor based on speckle correlation - experimental setup for high-speed measurements and in field tests (2016). 11th International Conference on Micro Manufacturing (ICOMM 2016), March 28th-31st 2016, Orange County, California (Paper No. 17).

 

Wilhelmi, P.; Foremny, E.; Bloem, A.; Schenck, C.; Kuhfuß, B.:

High Speed Referencing Systems for Linked Micro Parts (2016). 11th International Conference on Micro Manufacturing (ICOMM 2016), March 28th-31st 2016, Orange County, California (Paper No. 19).

 

Cui, C.; Schulz, A.; Moumi, E.; Kuhfuß, B.; Böhmermann, F.; Riemer, O.:

Co-spray-formed graded steel for micro rotary swaging tools (2016). International Journal of Mechatronics and Manufacturing Systems (IJMMS), 2016.

 

Cui, C.; Schulz, A.; Moumi, E.; Kuhfuß, B.; Böhmermann, F.; Riemer, O.:

Graded tool material for micro cold forming via a novel spray forming process (2016). 10th Tool Conference (Tool 2016), October 4th-7th, 2016, Bratislava/Slovakia.

 

Langstädtler, L.; Schönemann, L.; Schenck, C.; Kuhfuß, B.:

Electromagnetic embossing of optical microstructures (2016). ASME Journal of Micro- and Nano-Manufacturing June 2016, Volume 4, Issue 2.

 

Foremny, E.; Schenck, C.; Kuhfuß, B.:

Dynamic behavior of an ultra precision spindle used in machining of optical components (2016). Procedia CIRP (2016), 30th May, 2016, S. 452-455 http://dx.doi.org/10.1016/j.procir.2016.04.039.

 
 

Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfuß, B.; Grelak, F.:

Material Flow in Micro and Macro Rotary Swaging (2016). International Symposium on Green Manufacturing and Applications (ISGMA 2016), June 21st-25th, 2016, Bali, Indonesien.

 

Hasselbruch, H.; Herrmann, M.; Mehner, A.; Kuhfuß, B.; Zoch, H.W.:

Incremental dry forging - Interaction of W-DLC coatings and surface structures for rotary swaging tools (2016). 14th Global Conference on Sustainable Manufacturing (GCSM), 3rd-5th October, 2016, Stellenbosch/Südafrika.

 

Herrmann, M.; Böhmermann, F.; Hasselbruch, H. ; Kuhfuß, B.; Riemer, O.; Mehner, A.; Zoch, H.W.:

Forming without lubricant - Functionalized tool surfaces for dry forming applications (2016). 14th Global Conference on Sustainable Manufacturing (GCSM), 3rd-5th October, 2016, Stellenbosch/Südafrika.

 

Foremny, E.; Schenck, C.; Kuhfuß, B.:

Coupling system for ultra precision machining (2016). Journal of Mechanics Engineering and Automation, USA, 2016, ISSN 2159-5275.

 

Bloem, A.; Schenck, C.; Kuhfuß, B.:

Dynamic behavior of ultra precision feed axis at increased velocities (2016). 7th HPC 2016 - CIRP Conference on High Performance Cutting, Proceedia CIRP 46 (2016) 456-459.

 

Wilhelmi, P.; Schenck, C.; Kuhfuß, B.:

Diameter adaptive guides for wire based linked micro parts (2016). Proceedings of the 11th Conference on Multi-Material Micro Manufacture (4M), Kgs. Lyngby, Denmark, September 13-15, 2016, ISBN 978-981-11-0749-8.

 

Ishkina, S.; Schenck, C.; Kuhfuß, B.; Moumi, E.; Tobeck, K.:

Eccentric rotary swaging (2016). International Symposium on Green Manufacturing and Applications (ISGMA 2016).

 

Herrmann, M.; Moumi, E.; Ishkina, S.; Schenck, C.; Liu, Y., Kuhfuß, B.:

Werkstofffluss beim Rundkneten (2016). 23. Sächsische Fachtagung Umformtechnik Professur Formgebende Fertigungsverfahren (SFU 2016), Technische Universität Dresden,7./8. Dezember 2016, Dresden.

 

Langstädtler, L.; Schönemann, L.; Schenck, C.; Kuhfuß, B.:

Sequenced electromagnetic embossing and forming of optical microstructures (2016). EUSPEN Special Interest Group Meeting Structured and Freeform Surfaces Meeting, 9th-10th November 2016, DTU Copenhagen.

 
____________________________
Prof. Dr.-Ing. Kirsten Tracht
 
Hogreve, S.; Kaczmarek, S.; Adam, J.; Franz, L.; Döllen, T.; Paulus, H.; Reinkemeyer, V.; Tracht, K.
Controlling and assisting manual assembly processes by automated progress and gesture recognition. Applied Mechanics and Materials, Vol. 840 (2016) 50-57.
 
Hogreve, S; Kaczmarek, S.
Den Fortschritt erkennen - Gesten- und Fortschrittserkennung in der manuellen Montage. handling, 9 (2016), 72-73.
 
Onken, A.; Bader, A.; Tracht, K.
Logistical Control of Flexible Processes in High-throughput Systems by Order Release and Sequence Planning. Procedia CIRP, 52 (2016) 245-250.
 
Schneider, D.; Funke, L.; Tracht, K.
Logistische Steuerung von Hochdurchsatzprüfungen - Steuerung von Mikrobproben in einem System mit mehrere Prüfstationen, wt Werkstattstechnik online 105, 11/12 (2015) 818-823.
 
Schneider, D.; Tracht, K.; Meyer-Stender, M.; Mederer, M.
Customer stock in repairable item systems. Production Engineering - Research and Development, Vol. 10, Nr. 2 (2016) 209-216.
 
Schreiber, S.; Funke, L.; Tracht, K.
BERTHA - A Flexible Learning Factory for Manual Assembly. Procedia CIRP, 54 (2016) 119-123.
 
Weikert, F.; Tracht K.
STEP product model for micro formed linked parts. Production Engineering - Research and Development, Vol. 10, Nr. 3 (2016) 293-303.